Return to Home Page
Table Hockey Rocks in Southern California
 
Main Menu
Home
Table Hockey Tournaments
League Standings
Contact
Links
Frequently Asked Questions

Multimedia Menu
Photos
Videos
Articles
Blog
Downloads
Coming Soon

Community Menu
Forums
Live Chat
Find Players
Tributes

Official Forums Menu
Official ACTHF Forum
Official CTHA Forum
Official USTHA Forum

Donations Menu
Sponsors
Donate Here
Table Hockey Heaven Forum Index Table Hockey Heaven
Table Hockey Fourms
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Surface painting question.

 
Post new topic   Reply to topic    Table Hockey Heaven Forum Index -> Modifications, Repairs, Painting & Custom Games
View previous topic :: View next topic  
Author Message
Beener
Rookie
Rookie


Joined: 11 Jun 2010
Posts: 39
Location: Kingston, Ontario

PostPosted: Sun Dec 20, 2015 2:55 pm    Post subject: Surface painting question. Reply with quote

Hello everyone.

I have recently acquired a 1962 Eagle Hockey Night in Canada in pretty good shape. There is some scratching on the ice surface that goes right through the paint. I don't want to touch these spots up as I can never get the paint colors to match and it ends up looking horrible.
My thought is to sand the spots bit and then clear coat. Does anyone have luck with one specific clear? I just want the surface to be smooth and playable but clean it up a bit.
_________________
Keepin' it Wheel!
Back to top
View user's profile Send private message
Superdave3n2
2nd Team All Star
2nd Team All Star


Joined: 12 Jul 2007
Posts: 443
Location: Mississauga, Ont. Canada

PostPosted: Fri Feb 05, 2016 12:13 pm    Post subject: Reply with quote

Beener,
You should have just emailed me and I can give you the process I used to repair and paint and finish a surface.
Has the painted surface "Yellowed"?
If so, here is what I did.
First sand the spot you want to repaint.
Use a 400 to 600 grit sand paper and do it by hand.
Once the surface is prepared for painting, use "Testors" model paint.
Depending on how yellow the surface has become will depend on the mixing of paint.
Each game "yellows " differently.
You will need 3 colours, Gloss White, Gloss Brown, Gloss Yellow. A palette for mixing and testing.
Try to test on a similar board as your game and remember the wet paint is always lighter then the dry version so it is important to let your test board dry to get a true sample of what you want to achieve.
My game mix was one Testor bottle of white mixed with 3 toothpick drops of yellow, and 1 toothpick drop of brown.
That combination was what my game required.
Once I got the right mix I use a small paint brush and brush the the paint on the required area. Then I apply a gentle air to the painted area so as to smooth out the paint and let dry.
Once the paint has dried to 80%. I use a fine sandpaper (800+) grit and gently sand. Use a slightly damp cloth and wipe the dust off. Wait a few minutes and apply a second layer of paint. Do the whole process until you get the desired look.
You won't need to clear kote the surface.

I hope this helps.
Dave
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Table Hockey Heaven Forum Index -> Modifications, Repairs, Painting & Custom Games All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group
Table Hockey Heaven - Copyright 2007